Visit Pure & Original Canada Fresco vs. Marrakech Walls — which lime finish is right for your project?
Quick answer
Fresco is a 100% mineral limewash applied with a brush — soft and cloudy, like walls washed by decades of light. Marrakech Walls is a lime plaster paint worked with a trowel. Tactile and architectural, from raw concrete to a burnished tadelakt-look. Choose Fresco for the washed-wall look; choose Marrakech Walls when you want texture you can feel.
What each one is
Fresco is our 100% mineral lime paint: slaked limestone, water, and mineral pigments — nothing synthetic. The lime carries the color in layers, giving walls the soft, breathing quality of old European interiors. Available in 190+ naturally pigmented colors.
Marrakech Walls is our lime plaster paint. It brings the sculptural presence of plaster, raw concrete, or traditional tadelakt to an interior wall, without a full plastering installation. It is a tadelakt-look finish, not the traditional technique itself. Available in 200+ colors.
What separates them is not chemistry but body and gesture: Fresco is brushed on in thin veils of color; Marrakech Walls is laid on and then shaped with a trowel, so the surface itself becomes part of the design.
Key differences
| Fresco | Marrakech Walls | |
|---|---|---|
| Finish type | Limewash — soft, brushed | Lime plaster paint — tactile, troweled |
| Texture | Subtle; movement in the color and a gentle brushed texture. | Pronounced; concrete, plaster, or tadelakt-look depending on technique |
| Sheen | Near-zero, velvety matte | Matte through to burnished gloss (tadelakt-look) |
| Application tool | Block brush or cotton cloth | Roller or brush, then rounded-edge trowel |
| Coats | 2 standard | 1 layer; wait 10–15 minutes, then trowel |
| Coverage | ~130 ft² per liter per coat | ~60 ft² per liter |
| Skill level | Intermediate | Intermediate to advanced |
| Washability | Not washable unsealed; seal for wet or high-traffic areas | Wipeable when sealed; damp cloth only unsealed |
| Colors | 200+ | 200+ |
Visual outcome
Fresco gives you atmosphere. The brushed lime dries into cloudy drifts of color — deeper in one corner, lifting to almost nothing in another — so the wall changes with the hour and the season. Morning light reads it one way; candlelight another. The surface itself stays close to flat: the movement lives in the color, the way it does on aged limewashed stone. Note: whites have no movement in color, the charm is within the texture (same with Marrakech Walls)
Marrakech Walls gives you presence. The trowel leaves a surface with real relief, one that catches and throws light across the room. Worked loosely, it reads as raw concrete; smoothed, as hand-applied plaster; burnished, it takes on the sheen of a Moroccan hammam—the high-gloss tadelakt look. It is the finish you reach out and touch.
Both belong in Mediterranean, organic modern, wabi-sabi, and heritage interiors. And both are alive with variation; neither can produce a flat, uniform color, and that is the point.
Durability and washability
Neither finish is washable without sealing — lime stays open and mineral. Unsealed Fresco tolerates light dusting only, and should not be scrubbed during its 28-day cure. Unsealed Marrakech Walls can be spot-cleaned with a damp cloth. Sealed, both become wipeable and moisture-resistant: Dead Flat Eco Sealer for Fresco; a compatible sealer or protective topcoat for Marrakech Walls. For walls that need regular washing without a sealing step, Licetto is the better choice from the range.
Room suitability
Both are at home in living rooms, dining rooms, bedrooms, hallways, powder rooms, and feature walls. Both move into bathrooms and kitchens when sealed — lime is naturally mold- and bacteria-resistant, which makes it a quietly practical choice for humid rooms. Neither belongs inside a shower cabin or on floors (use Carazzo for floors; Massif for countertops, bathroom floors, and heavy-use wet rooms). On drywall and other synthetic surfaces, both require Wallprim primer.
DIY difficulty
Fresco is the more forgiving of the two. Brush technique shapes the outcome, but the overlapping strokes have a rhythm most confident DIYers find within a sample board or two, and the imperfections are part of the language of limewash.
Marrakech Walls asks more of you. The trowel stage (angle, pressure, and timing, starting 10–15 minutes after application) is where the finish is made or lost. DIY is achievable with practice, and many find the trowel work the most satisfying part. For large areas or burnished tadelakt-look finishes, professional application is recommended.
Which one should you choose?
- Walls that feel washed by time — soft, cloudy, quiet → Fresco
- Texture with presence — plaster, concrete, tadelakt-look → Marrakech Walls
- The gentler learning curve → Fresco
- A burnished, glowing feature wall or powder room → Marrakech Walls (consider professional application)
- A sealed bathroom → either; Fresco for softness, Marrakech Walls for depth
- Countertops or heavy-use wet rooms → neither; look at Massif
- Flat, uniform, washable color → neither; look at Licetto
